MTL - Comeback 1992-Chapter 1138 Core business
Chapter 1138 Core Enterprise
Mainline C190, as a mainline airliner, still maintains a record of zero accidents after several years of operation. It proves that Xinzhou C190 is reliable in terms of quality.
Of course, there is one more point, the customers of Xinzhou C190 are mainly domestic airlines.
Even small domestic airlines can do better in aircraft maintenance.
If you want fewer aircraft accidents, you must do a good job in ground maintenance.
Some airlines, no matter how good the plane is, still have to fall.
For example, poisoning.
There is a lot of business overlap between Xingfei Industry and Samba Aviation Industry, which naturally forms competition.
In the field of regional airliners, the MA 700 and MA 900 of Xingfei Industry performed extremely well.
After years of continuous improvement, the models of the two aircrafts have also become more abundant.
They can be seen on various routes around the world.
As for the domestic market?
MA 700 and MA 900 occupy an absolute dominant position in the domestic regional aviation market.
Now that airports around the world have been put into use, coupled with the continuous reduction of air ticket prices, the number of people traveling by air has increased significantly.
Among them, the regional passenger and cargo aviation market is growing rapidly. As a flyer airline that focuses on the development of regional routes, its development speed has naturally been quite fast in recent years.
Flyer Airlines is also preparing for a formal listing. After listing and financing, it will be able to obtain more funds to purchase aircraft.
In July, the sun was scorching hot. After walking around for a while, I was sweating profusely and my clothes were half wet.
Han Songlin came to Shencheng at this time.
Even with the sea breeze, the moon is still unable to dissipate the heat at this time.
Coming to Shanghai at this time, there is naturally something to do.
Shenwei Equipment officially developed the EUV prototype, and Han Songlin also came here for this.
As the fifth-generation lithography machine, EUV lithography machine can undertake the important task of continuing to advance the chip manufacturing process to smaller nanometers.
The whole world is waiting for a technological breakthrough.
In 2010, ASML developed the world's first EUV prototype.
But until now, ASML has not officially supplied to downstream customers.
Even if ASML officially supplies to downstream customers, it is impossible for Synder Technology to purchase EUV lithography machines from ASML.
But now Shenwei Equipment has officially developed the EUV prototype. Although it is 4 years later than ASML, it does not mean that there is no chance to surpass it.
Han Songlin carefully looked at the technological product in front of him, which is called the ultimate human technology at this stage.
Being able to make the EUV prototype is inseparable from the efforts of countless scientific researchers across the country.
It is not easy to manufacture lithography machines, especially EUV lithography machines.
The corner of Han Songlin's mouth was full of smiles. Many people thought that Huaguo couldn't make anything, and now it was right in front of us.
Not only was it made, but it was made extremely well.
Of course, in this world, people never think that Huaguo cannot manufacture EUV lithography machines.
It is clear that EUV lithography machine will be available sooner or later.
Because in the field of lithography machine R&D and manufacturing, Huaguo owns Shenwei.
Shenwei has never let people down. For so many years, it has been continuously researching and developing.
Han Songlin sighed slightly: "The manufacturing cost alone costs 400 million yuan, which is really a bit expensive."
A lithography machine, can you not only look at the manufacturing cost, but also the research and development cost.
The final cost depends on how much is manufactured. Anyway, the more manufactured, the cost can be diluted a lot.
Otherwise, it will always be high.
Obviously, the global demand for EUV lithography machines will not be too much.
Shenwei and ASML have to compete in the market, so the situation will become quite interesting.
Is ASML strong?
It depends how you look at it.
The EUV lithography machine developed by it is the only one in the world, and it is four years earlier than Shenwei.
But it has been four years since the prototype was produced, but there has been no way to officially supply it to downstream customers.
There must be a problem in one of these links.
There is also a possibility that ASML is deliberately not supplying the products so that the previous products can earn more profits.
When new products come out, old products cannot be sold. Everyone knows this.
"When our prototype comes out, what will be the reaction from ASML?"
"It is estimated that the supply of EUV lithography machines will be accelerated."
Han Songlin frowned involuntarily. He didn't know when ASML would supply EUV lithography machines to downstream customers.
But he does know that 7-nanometer chips will be quite popular in 2021.
Calculated in this way, ASML's EUV lithography machine will be officially supplied to downstream customers, and it will only take two years.
Can Synder Technology buy EUV lithography machines from ASML?
Maybe ASML will sell it, but you have to wait for the goods.
Synder Technology has no shares in ASML.
To buy ASML shares, it is better to invest money in Shenwei.
Han Songlin: "Now that the prototype machine has been made, it is necessary to speed up the time, not to mention the supply of EUV lithography machines before ASML. , will bear a considerable blow."
Shenwei is also very aware of this. After the prototype came out, the R&D team only had a one-week vacation, and then they reconvened to prepare for the improvement of the prototype.
There is still a long way to go from the prototype to the official delivery.
The prototype machine has many immature parts. If it is used in large-scale industrial production, it may just lie down at every turn.
These are all problems that need to be solved.
Of course, with the existence of prototypes, for Starsail Semiconductor, it is possible to make some chips with a process technology below 22nm.
For example, chips with 18nm process technology.
The chip design has already been completed, but because there is no way to produce it, there has been no way to determine whether there is any problem with the design.
Star Sail Semiconductor quickly brought several chips to the EUV lithography machine for trial production.
Shenwei made the EUV prototype, so it is natural to carry out publicity reports.
Shenwei is not a listed company, so the promotion of this matter is naturally not to boost the stock price or the like.
Actually, after the news came out, the stock prices of two companies rose sharply.
Syndar Technology and Starsail Semiconductor.
We all know that these two companies rely on Shenwei. Now that Shenwei's EUV prototype is released, it means that there will be no restrictions on the chip production process.
The most difficult problem has been solved. For Synder Technology and Star Sail Semiconductor, the stock price must rise a wave to celebrate.
EUV prototype was developed, and it went directly to Seven O’Clock News.
It took 13 minutes to report on this matter, and comprehensively sorted out the importance of EUV lithography machines.
In addition, Shen Wei was also reported in detail.
Let the world know that there is such a powerful company in Huaguo, a giant company in global lithography machines.
Although in terms of annual revenue, compared with many companies, Shenwei is not worth a fraction.
But in terms of technological content and importance to the country, Shen Weike is too unusual.
In Seven O'Clock News, Shenwei was directly positioned as a national core enterprise.
Such a title is not unreasonable.
(end of this chapter)
