MTL - Super Craftsman-Chapter 962 I do n’t have super calculations (Part 1)
When researching the technology in reverse, the best information is the actual and detailed documentation, but it is obviously very rare, maybe one of the thousands of times, it is already quite good, It can surprise people. The second-ranked ones have detailed technical documents but no physical ones.
However, even getting technical documents, sorting them into categories, translating, reading the whole, comparing, and sorting out the context, this is not an overnight effort. If you want to analyze the technology you need, it will take a long time.
This is still the case when there are related documents. If there is no related document, the first thing is to get the real thing. With physical objects, you can test according to the physical objects and carry out the work of anti-mapping.
However, the anti-mapping work is not so easy. Guo Tailai can do it quickly with nano-robots, but ordinary scientific researchers want to do it, they have to record a detailed video and documentation, from the outside to the inside of a screw to remove a screw, layer by layer of wire stripping cocoon, one by one Draw the components.
If it is a regular-shaped part, it is better to say that the measurement work can be done with a little more precision. If it is an irregular part, then it is troublesome, only the approximate curve can be measured, and the workload is crazy. Moreover, I am afraid that one is not careful, the order is wrong, or one part is out of the extra, which is a big trouble.
What's worse is that there are only structural drawings, just like the structural drawings of the series of aircraft and engines submitted by Guo Tailai last time. Looking at the graphs out of thin air analysis requires extremely strong spatial analysis capabilities. Sometimes the parts are made according to the structural drawing, and assembly is also a big problem. Accuracy is not accurate. It is not yet known whether it can run. This is also the reason why some people still doubt the authenticity of Guo Tailai when he submitted the structural drawings. No physical reference, only rely on drawings to analyze, after all, the difficulty is still too high.
This time, the experts thought that there were still only structural drawings, and everyone could only join a large group of people to turn over the drawings to research and then try to find some technical solutions from the drawings, and slowly reversed the other party ’s technical truth. A team that does not have dozens or hundreds of people for a year and a half will surely be fruitless.
Then a huge surprise hit everyone's head.
A complete set of 3d animation diagrams describing the working principle of mt30, as well as exploded diagrams of some parts, with explanations. Even more powerful is that there is a complete 3D assembly instruction, which is simply the most intuitive, complete and easy to interpret technical design plan!
From the overall airflow and how the fuel enters the combustion chamber, how to push the impeller to rotate, until the details of how a certain impeller is shaped and aerodynamic performance, each stage of different impeller rotation speed and pressure, each stage The air temperature range, the material performance range used, the limit force range analysis, various requirements during assembly, the torque range of various fasteners, the required installation accuracy, etc. are all fully described in the 3d animation. .
Although every time it is given a general range, not a precise number, it is much better than groping for nothing. To be honest, even if it is an experiment, it is done many times less than a little information.
The experts present are not those who do n’t understand anything. Looking at the animation demonstration, and then looking at the force analysis, it is probably still conceptual whether the technical principles in these animations can be established. Those data, if you really start researching, should also be time-consuming to calculate, maybe not so accurate, but the big difference should be within this range, real technical experts still have this judgment.
Especially the technical experts who were transferred from a certain project team, after reading this complete demo, they were determined immediately, these are all established, as long as the data in this demo is verified, reverse mapping can be avoided The detailed structure drawings and assembly instructions are available. Create parts according to these drawings, and then install them according to the assembly instructions. It can be verified on the machine.
Can't help but these experts looked at Zhao Yanyan. Zhao Yanyan is the leader of their project, and what they studied before is also a naval gas turbine, but it is reversed from naval to aviation.
That ’s right, the project team where these experts are working is to study the engine on Guo Tailai ’s high-speed yacht, then change it to an aero engine, and finally use it for the domestic Osprey project team. Zhao Yanyan is their team leader.
The two gas turbines used on Guo Tailai's high-speed yacht are actually derived from Rollo's mt7. In fact, the technical principles are the same. This is why these experts feel no problem after seeing it.
No one doubts that Guo Tailai had stolen Luo Luo's technology before coming, because that time until now, there has not been mt7's appearance. A person steals the technology that has not appeared for several years in advance?
At most, Zhao Yanyan would only think that at that time Guo Tailai improved and designed the mt7 engine from the most basic technical principles of the Luo Luo engine, so now I got the actual mt30, I easily understood the mt30 technology, and then used this method Show it to everyone.
This also explains why Guo Tailai got the turboshaft engine, and it did n’t take a long time to improve it, because it ’s all a company ’s product, and it has long been understood in principle. Of course, it also explains why in just one year, they saw this detailed 3d animation and structure diagram, the reason is exactly the same, because Guo Tailai is very familiar with Luo Luo's technology.
Others don't know where these things come from, can Zhao Yanyan not know? Even if some people might guess that it may be related to Guo Tailai, no one will admit that those people will not confess a word. Those who can enter this project group are all genuine military experts with politically qualified technical skills. Organizational discipline is still very particular.
Now Zhao Yanyan is getting more and more curious. Guo Tai came to Lu Zhiming and asked for a batch of new materials. What is it going to do? Is it directly to make a mt30 in kind? With the temperament of his own fat man, maybe he will also make a mature mt30 that solves some small problems. After all, these are not the most mature products. If that is the case, it is definitely a big surprise.
However, these are enough surprises. How much thought does it take a fat man to study these things in reverse through a structural diagram? Yes, the fat man should have guessed that General Chu and himself have been under pressure from all sides for more than a year, so they will give such an explanation that everyone can't speak.
To put it bluntly, the fat man is still for himself. Someone always thinks for themselves, this feeling is really beautiful!
