MTL - Monster Factory-Chapter 45 : I want to build a research laboratory

When the truck that hangs the Zhongyun license was driven into the Gangshan stone processing factory, Ye Qing received a warm reception from the hero.

Xu Shuangjie led a large group of workers and stood at the door and applauded. This courtesy made Ye Qing happy and at the same time had some emotions.

When I first went to the processing plant in Sanqing to send the machine, the attitude of the other party was extremely cold. Later, the machine went wrong to repair, but even one could not eat it early.

Sang Qing, Ye Qing is a little funny.

I don't know if this guy was detained for a few days, and he had to be detained for 15 days in public transportation. Fifteen days are reserved for those who have no way. The problem is that Zhongyun City should engage in civilized construction and strive to create a national title for health and civilized cities.

Resting on this section of the eye, there is no way to go. Paying close attention to the construction of health and civilization is the most important goal of all science bureaus. Who dares to say it?

"Welcome welcome, welcome Ye boss to visit." Xu Shuangjie frustrated his hands.

Ye Qing smiled and said that being too polite and polite, first get the machine down and try the performance.

A forklift that had already been prepared was opened. Under the care of the employer, the driver carefully carried the machine, together with the wooden base, into the iron shed of the stone factory.

The power supply is already ready, even the ground, Xu Jie double level with a level, carefully trimmed.

After setting up the machine, Ye Qing turns on the power switch of the machine and presses the start button.

The driver in the engraving machine is no different from the common programs on the market.

Xu Shuangjie and a group of workers are looking forward to it. On the 10-inch LCD screen, the PLC general control program is running.

This kind of program operation is very convenient, and anyone who has played CNC machine tools will use it.

This control program is widely used in many small CNC machine tools. As long as the coordinate parameters of the X axis, Y axis and Z axis of the machine tool are set, and the position of the three axes can be accurately positioned after commissioning, most of the machine tools can be driven.

Of course, if you want this general-purpose program to read CAD drawings, you still need to pay the programmer to do the decoding and transcoding.

The monster factory directly fills the program, although it is a common program in the market, but it is absolutely perfect, without any modification and debugging.

The engraving machine is turned on and the three bearings are returned to zero. Xu Shuangjie took a deep breath and took control of the restless mood, and inserted the U disk into the console.

Along the workers, they lifted a slab of 1 meter by 1 meter and put it on the workbench. Then install the high-precision carving knife and the water pipe to the engraving machine.

The engraving machine workbench can only process slabs of 1 meter in length and width.

Xu Shuangjie looked at everything and shuddered at the start button.

With the button press, the cone-angle diamond engraving knife immediately rotates at a very high rotational speed, and then the vertical axis descends, allowing the rapidly rotating engraving knife to contact the stone surface.

At the moment of contact, the original clear water flow immediately becomes turbid, and a large amount of stone powder is mixed into the waste water tank.

The slate on the workbench was also quickly peeled off by the carving knife, revealing a beautiful stone sculpture.

All the onlookers, including Xu Shuangjie, have been stunned.

Ordinary engraving machine, even metal engraving machine. The impression is always slow, and the old cow pulls a little bit for a long time.

I hope that this engraving machine will be engraved on a large scale, and will not blame the customer for waiting for the eye.

Now, this engraving machine is simply a fighter in the engraving machine.

In two minutes, it only took two minutes. The original ordinary slate became a beautiful Guanyin engraving.

Xu Shuangjie chose a pair of sitting Guanyin drawings. The carving difficulty of this stone carving is not as complicated as the curb.

However, the ordinary engraving machine can't engrave the Guanyin figure composed of such delicate lines.

"How, still satisfied?" Ye Qing is not strange to this, this can be sold in the engraving machine, completely castrated version.

The control program is different, the engraving speed is in front of the one used by itself, and the difference is several times. The engraving definition is a lot worse.

Ye Qing’s own one is completely black technology.

The performance of this station, although the performance of a large number of engraving machines on the market, but did not reach the level of black technology.

These gaps that Ye Qing believes are not in the eyes of Xu Shuangjie.

Although the effect of engraving is worse than the curb in the photo.

Compared with the ordinary engraving machine, it can be more than one grade, and the speed is faster.

"Satisfied, very satisfied." Xu Shuangjie's eyes are all possessed, just like touching treasures, gently touch this engraving machine.

This engraving machine, I am afraid the only drawback is that the processing size is too small to engrave the large slate.

"Just... just how I feel, the effect of carving is worse than the curb stone carving you made."

“That is our factory, using high-precision machining centers, and several test items hand-made by engineers.” Ye Qing gave a very reasonable explanation: “The production model, naturally there is no way to make that kind, otherwise the price will be Turn it over."

"Enough is enough, this precision is enough." Xu Shuangjie did not dare to ask for too much. With this engraving machine, it was enough for him to sweep all the stone processing factories in the county.

"So, do you think that the cost of this engraving machine is fixed?"

Xu Shuangjie did not bargain and did not dare to bargain. The boss is not happy, isn’t he going over with his own money?

In order to be afraid of night long dreams, Xu Shuangjie also settled the deposit for the remaining four machine tools, a total of 1.5 million, transferred to Ye Qing's company account.

After confirming the account, Ye Qing took the invoice from the old company to Xu Shuangjie and promised to guarantee the warranty for half a year.

"Ye Boss, don't leave at night." Xu Shuangjie's face is a compliment smile: "I invite you to eat game, then go to the club for a lap. After the end, I will send someone to drive you back."

"No need to do ~ I still have things at night." Ye Qing who dare to go to any club, honestly go home.

Xu Shuangjie’s sincerity is very good, or he really wants to tie up Ye Qing. In the end, I couldn’t keep it. I had to stuff a supermarket shopping card for Ye Qing.

Say goodbye to the enthusiasm of Xu Shuangjie, when Ye Qing returned to Zhongyun City. It happened that the intermediary company called and told Ye Qing that his registered [Giant Heavy Industry] company license had come down and could go to the collar.

[Juyuan Heavy Industry], Ye Qing is the only legal representative and the only chairman.

It’s just that the scale of this heavy-duty manufacturing enterprise is too small, and the registered capital is only 10 million. This is still the case of Ye Qinghua’s 80,000 yuan, looking for an agent to do the verification.

At the third level of the monster factory, you can buy camouflage overalls. By the time the monsters automatically have human identification, Ye Qing can pull them all into the enterprise.

Received a license, tax registration certificate, and organization code certificate. Ye Qing also consulted the intermediary company.

Q What procedures are required if you want to establish a research laboratory. Mobile phone users please visit http://m.piaotian.net